Analyseur COT Sievers M500 Online

Constructeur: Veolia
Réf. HTTS: HTS-SA-0382
Réf. HTDS: ANALYSEUR DE COT SIEVERS M500 ONLINE
Division: Sciences Analytiques

Description

L’analyseur de Carbone Organique Total M500 est le nouveau instrument de référence pour les analyses en ligne dans le domaine pharmaceutique et microelectronique. Grâce à sa technologie breveté basée sur la mesure de conductivité à membrane sélective, et sans réactifs, le M500 et le M500e apportent une fiabilité totale pour la mesure d’eaux purifiées ou ultra-pure (eaux ppi). Le M500 a été conçu pour apporter aux laboratoires la capacité de libération des eaux pharmaceutiques en temps réel tout en respectant la conformité avec l’assurance qualité, et les différentes normes (Ph. Eur 2.2.44 ; USP 645 ; USP643). C’est aussi un analyseur polyvalent, idéal pour la validation du nettoyage en ligne, et intégrant les protocoles de validation.

Une performance de pointe chez le leader de la technologie de la membrane conductimétrique.

Technologie conductométrique à membrane sans réactifs breveté Sievers

Caractéristiques

Fiabilité, robustesse et précision
Discrimination carbone organique / inorganique
Automatisation
Conforme aux nouvelles réglementations pharmaceutiques
Standardisation et personnalisation des protocoles : meilleure productivité

Spécifications techniques

Fuses: No user-replaceable fuses
Range: 0.01 to 800 μS/cm
Inputs: Two isolated binary inputs
Size H: 43.4 cm (17.1 in) W: 55.9 cm (22.0 in) D: 28.7 cm (11.3 in)
Weight: 16.3 kg (36 lb)
Display: Backlit 10.1 in, 1280 x 800, touchscreen display
Outputs: Serial (RS-232), one USB, three 4-20 mA, four alarms, one Ethernet
REMOVAL: inorganic carbon provides critical
Accuracy: 0.005 μS/cm or 1%, whichever is larger
services: — Customized
IP Rating: IP 55
Precision: ≤ 1.0 % RSD
compounds: calibration, & validation security, and data management
— Range: 0.03 ppb – 2.5 ppm — 50% reduction in analysis time — Designed for 21 CFR Part 11
years ago.: SIEVERS LEGACY
Maintenance: — Upgrades
INSTALLATION: VALIDATION OPERATION SUPPORT
Linear Range: 0.03 to 2,500 ppb as TOC
Sievers M500: Designed for Today’s Data
— Software: — Warranty
— Training: — Onsite validation
Interferences: Insensitive to organic heteroatoms
Low TOC Vials: and Customized Solutions
Analysis Modes: Online, Online Averaged, Online Timed, Grab
Optional Wi-Fi: 802.11ac/a/b/g/n Dual band 2.4/5 GHz
Display Readout: 3 significant digits
Engineers (FSE): Engineers (FSE) materials
Gamme de mesure: de 0,01 à 800 μS/cm en conductivité
Sample Pressure: Up to 100 psig
Maximum Altitude: 3,000 m (9,843 ft)
Pollution Degree: 2 (normally only non-conductive pollution)
Analysis Time1, 2: 3 minutes for continuous online measurements
— Documentation: Reports (FAR)
— Field Service: — Field Service — Certified reference — Technical support
External Flow Rate: Minimum 50 mL/min
Power Requirements: 100–240 VAC, 70 W, 50/60 Hz
Sample Temperature: 1-95°C (34-203°F) (withstands short-term steam exposure)
Ambient Temperature: 5-40°C (41-104°F)
Ozone Compatibility: 50 ppb O3continuous; 200 ppb O3for 2 hours daily
Customized Protocols: The Sievers M500 includes an expanded
Calibration Stability: Typically stable for 12 months
— Limit of Detection: 0.03 ppb — Simultaneous TOC & conductivity — Remote access
Communication de pointe: Ethernet, WiFi, 4-20 mA, Modbus, Profinet, et transmission série
interference from other: — Automated system suitability, — Improved data transfer, data
— Onsite installation: — Validation Packages — Vials and
Maximum Relative Humidity: Up to 95%, noncondensing
Sample Flow Rate (nominal): 0.25 mL/min
— Limit of Quantification: 0.1 ppb — Advanced communications with
Normal Operating Environment: Intended for indoor use only
— Super iOS 4-port sampler: Ethernet & WiFi
Customized Reference Standards: applications.
Installation/Overvoltage Category: II (protects against transients present in Category II power)
©2020 SUEZ. All rights reserved.: 300 00248 EN Rev. A
— Measurements compliant to USP,: — Adaptive auto-zero
Industrial Communications Protocols: Modbus TCP/IP & Profinet (Included), Profibus (Optional)
SUEZ provides a complete lifecycle solution: documentation required to support compliance,
Maintenance Agreements to provide peace of mind: investigations faster and more efficiently.
for Sievers products. We offer a suite of tools: quality, and regulatory needs.
— Simultaneous TOC & conductivity measurement: ADVANCED COMMUNICATIONS
Trust Sievers validation services and Preventive: Reports (FARs) to help close Out-of-Specification
conductometric technology to the market more than 25: advancing the