Pont de mesure RLC 11050 hautes fréquences

Gallery and technical drawings

Description

Key features

• Paramètres téstés : L,R, Z, Y, DCR, Q, D , θ
• Programmation de BIN et de fonction GO/NO GO
• Circuit équivalent : Série et parallele
• Ecran de contrôle déporté

Technical specifications

C

0.00001pF ~ 999.999F

L

0.00001uH ~ 99.999MH

Z

0.1%

DCR

0.1%

Tel

+886-3-327-9999 China PC: 518052 Tel: +81-45-542-1118 Tel: +1-949-600-6400 Fax: +31-318-648288

1MHz

10mV ~ 5V; [(10 + fm)% + 1mV]

Fast

15ms

Q, D

0.00001 ~ 99999

R, Z

0.01m ~ 9999.99M

Slow

295ms (1kHz)

http

//www.chromaate.com Fax: +86-755-2641-9620 http://www.chroma.co.jp http://www.chromausa.com E-mail: [email protected]

Model

11050

Speed

7

E-mail

[email protected] E-mail: [email protected] E-mail: [email protected] 11050-E-201407-500

Medium

150ms

Weight

Approx. 7 kg / 15.43 lb

A110211

Test Fixture (DIP) A133510 :LAN & USB-H Interface

A110501

4-Terminal SMD Test Fixture A133509 :GPIB Interface

Judgment

Compare, Bin-sorting

80VA max.

2. Buttons 10. RS-232C & USB Ports

Interface

RS232,USB, GPIB (option) et LAN (option)

Correction

Open/Short Zeroing, Load Correction

Test Level

10mV ~ 5V

Requirement

4. Power & Test Indicator 12. Grounding Terminal

Temperature

10 ~ 40 ; Humidity : 10% ~ 75%

Test Signal

2

1. LCD Panel

9. Remote Control Port

HEADQUARTERS

CHINA JAPAN U.S.A. EUROPE

HF LCR METER

MODEL 11050

Trigger Mode

Internal, Manual, External, Bus

environment.

testing of power inductors is increasing. The

100 , 25 , OFF

3

Basic Accuracy

5 4 6

SPECIFICATIONS

PANEL DESCRIPTION

Test Frequency

1kHz ~ 10MHz

Test Parameter

L/C/R/Z/Y/DCR/Q/D/

CHROMA ATE INC.

Service Network

RS-232C HANDLER

GPIB LAN

Tension de test

10mV à 5V

7. Panel Bracket

15. Handler Interface

Test Level >1MHz

10mV ~ 1V; [(10 + fm)% + 1mV] 1

Vitesse de mesure

15ms à 295ms

11050 :HF LCR Meter

A110234 :Test Leads (1M)

Gamme de fréquence

0,1Hz à 10Mhz

Taoyuan County 33383,

8F, No.4, Nanyou Tian An Yokohama-shi, Kanagawa, 19772 Pauling, The Netherlands

3. Remote Control Port

11. Power Inlet

Dimension Display Unit

150 x 260 x 50 mm / 5.91 x 10.24 x 1.97 inch 5. Measurement Terminals 13. Ext. Bias Current Control Port

Hwaya Technology Park,

(SHENZHEN) CO., LTD. 472 Nippa-cho, Kouhoku-ku, SOLUTIONS, INC. Morsestraat 32, 6716 AH Ede,

8. Optional Interface Slot

16. Ext. Voltage Terminal

(H x W x D) Measurement Unit

65 x 390 x 320 mm / 2.56 x 15.35 x 12.60 inch 6. Power Switch 14. Remote Control Port

Developed and Manufactured by

Worldwide Distribution and

RS-232C, Handler, USB storage,

9

results within a limited testing time.

high frequency testing applications.

The detached design adopted by the Chroma

The Chroma 11050 HF LCR Meter was designed

productivity when working in an automated

and low power consumption, required frequency

components characteristics under different

control.

found in other Chroma LCR Meters, the 11050

or bad. The buffer capacitor plays an important

15ms measurement speed effectively increases

communication devices with thin form factors

are needed when integrated into an automated

high speed testing for automated production line

output impedance modes to satisfy demands of

function properly under various voltage transient

11050 provides several advantages. Since test

with many enhancements and key features to

LCR Meter has a broad testing frequency range

current source. Optional GPIB and Ethernet

and loss factor of passive components. The HF

and controls the output of an external DC bias

automated test environment providing accurate

demonstrates the usefulness of Chroma 11050 in

from 1kHz to 10MHz suitable for analyzing the

remote interfaces are available as well for software

instrument designed to accurately measure and

remote interface options. Handler and RS-232C

measuring and working with other instruments.

conditions; the equivalent series resistance must

secondary parameters required for testing the

trigger, judge test results, and collect measured

the measurements to transfer seamlessly to an

accuracy of low impedance measurements

includes additional useful functions. It has 3

role for overall circuit reliability and must

measurement capabilities cover the primary and

hardware control of test conditions, measurement

the DUT. The timing settings of trigger delay,

during R&D so that it simulates the user s actual

evaluate passive components at high speeds. Its

remote interfaces come standard for software or

measure delay and average number of times allow

application as closely as possible. The increased

voltage and current that is actually carried to

and with enhanced key measurement capabilities

3 modes impédances de sorties séléctionnables

100Ohm, 25 Ohm et OFF

test environment. Shorter test leads improve the

or incoming/outgoing inspection applications.

the test signal monitoring function displays the

testing passive components at high frequencies

In addition to the excellent measurement features

become a critical indicator to identify if it is good

The Chroma 11050 HF LCR Meter is a precision test

Chroma's 11050 HF LCR Meter has multiple

processing and the display use separate CPUs, the

make it the best choice to meet the demands of

testing speed is increased and shorter test leads

modern component characterization analysis and

The versatile digital display can be configured to

remain at a very low level when operated at high

inductance, capacitance, resistance, quality factor

data. The standard USB port saves device settings

provides stable and highly reliable results. A fast

Due to the design of modern portable electronic

best fit the current testing resolution; furthermore,

frequencies. The Chroma 11050 is focused on

66 Hwaya 1st Rd., Kueishan CHROMA ELECTRONICS CHROMA JAPAN CORP.

CHROMA SYSTEMS CHROMA ATE EUROPE B.V.

Taiwan Industrial Estate, Shenzhen, 223-0057 Japan Foothill Ranch, CA 92610 Tel

+31-318-648282

Applications

• Test de composants
• Tests de matériaux