Four 1200° pour analyses éléctriques

Gallery and technical drawings

Description

Key features

• Compatibilité : Solartron 1260A, Solartron Modulab XM , interface diéléctrique 1296A
• 2 porte-échantillon : disques et disques & barres

Technical specifications

-A

-B -C MTS 1260/96

Phone

+44 (0) 1252 556 800 Phone: +1 865 425 1360

Power

1.5 kW Impedance, (bulk, grain boundary, electrode)     

ranges)

Thermocouples, S type

including

w Reactivity and degradation

/ shutdown

Type N thermocouple hard-wired to Bar samples 

129621A/B/C

Equip

Construction

Heating elements embedded

Disk samples

  

Furnace type

Vertical, hinged, split tube furnace Sample Holder or stainless steel (-SA/SB/SC)

and blanket.

range of furnace

environments

coefficient and van der Pauw 4

Heated length

300 mm Atmosphere control Swagelok quick-connects

- 1260A /1296A

over-temperature cutoff and

Physical setup

Furnace is positioned 550, 650 or Single or dual atmospheres (dual only for

UNITED KINGDOM

USA

Main Controller

Eurotherm 2416CG connected to PC

- ModuLab XM MTS

Probostat™ sample holder with

Heating elements

Spiral wire coils embedded in

Sample disk size

20 mm sample diameter recommended

Operating voltage

208-240 V or 120 V single phase Conductivity vs. T, pO2, pH2O    

Temperature range

Room temperature to 1200°C Gas supply tubes, alumina / silica

Dimensions (h.w.d)

1200 mm X 500 mm x 500 mm 3-electrode mode    

Control thermocouple

Selectable between internal furnace

(higher upon request)

is equipped for measurements

FARNBOROUGH, GU14 0NR

TN 37830

Gamme de température

ambiante à 1200°

Temperature resolution

0.1°C

UNIT B1 ARMSTRONG MALL

801 SOUTH ILLINOIS AVENUE

reducing, or corrosive

samples, including Seebeck

requirements from room

Sample Holders

temperature controller

Dual atmosphere mode  

SOUTHWOOD BUSINESS PARK

OAK RIDGE

temperature solid-state

and insulators C-V, Impedance, and Mott-

temperature to 1200 °C

The 129621A sample holder

ultimate advanced high-

w High temperature dielectrics techniques including I-V, Pulse,

of precision time domain

instrumentation and sample

varied sample geometries

furnished providing the full range

Systems can be configured

grain boundaries and electrodes fully integrated electrical

These well proven systems

point conductivity measurements.

access to the sample. The

materials characterization

[email protected]

www.solartronanalytical.com

w High quality split tube

flexible holder positioning using a

(ramp, pulse, I-V), and AC

holder configuration

Norwegian Electro Ceramics

systems...

heat distribution and easy

10 μHz to 32 MHz enables full

materials characterization

w Fuel cells materials Schottky.

over-temperature safeguard

Simplified sample load 

129620A, that provides even

w Wide frequency range from

AS, and Carbolite Ltd, have

Solartron materials test systems

materials, and able to test

The 129621B is more extensively

joined forces to produce the

run a wide range of electrical

Échantillon barres maximale

Hauteur 25- 50mm

Échantillon disques maximal

diamètre 20mm

• 1260A Impedance Analyzer

4pt conductivity (van der Pauw) 

Carbolite furnaces that cover

LabJack positioner.

Transport number measurements

   

to your specific requirements

w Electroceramics measurements with

using top performance, highly

temperature control

750 mm (from base to middle of

versions ‘A’ and ‘B’)

in wet, dry, inert, oxidizing,

of techniques for disk and bar

• ModuLab and SMaRT software

Further expansion and customization   

Temperature stability Stability

< 1°C Sample types 129621A - disk only (normal)

Seebeck coefficient measurements



for easy access to sample holder

Hot zone parts Spring-loaded sample support tubes, alumina

w Solartron Analytical’s range

depending on the choice of

(Contact us for other temperature

Electrode connects, Pt and alumina

ProboStat sample holder height is

available upon request

cover for maximum operator safety

life, calibration, and user expertise

materials test products, including

Gas permeation  

Outer case stainless steel with mesh

Temperature accuracy Typically 1°C, depending on thermocouple

heated zone) using a desk top stand.

Gas mixers and other ancilliary equipment

insulation together with fibre board

Temperature range Room Temperature to 1200°C depending on

Stabilité et résolution température

< 1°C et 0,1°

Single (button) fuel cells and electrolyzer

   

129620A High Temperature Furnace Specification

129621A/B/C Sample Holder Specification

Solartron Analytical, NorECs Applications include

Solartron materials test

High Temperature Furnace Customized Carbolite VST12/300

High Temperature NorECS ProboStat™ base unit brass (-A/B/C)

Applications

• Développement de matériaux : oxydes, éléctro-céramiques, matériaux super-ioniques…
• Caractérisation de piles à combustibles, batteries
• Idustrie : Isolants hautes-temperature, système de freins..